Import Paste Solenoid Valve

OKE High Viscosity Solenoid ValveOverview

The imported high viscosity solenoid valve is used for media with viscosity exceeding 50 cst. This high viscosity solenoid valve adopts a stainless steel flying saucer piston seal, which effectively seals high viscosity media. The valve features an enhanced coil power and a strengthened return spring, ensuring reliable sealing when closing against high viscosity media. It is widely used for high viscosity media such as petroleum, crude oil, paste, and glue.

Normally Closed: When the coil is energized, the pilot valve core is attracted, the pilot hole opens, the upper chamber depressurizes, and the piston is pushed by the medium pressure in the lower chamber to open the valve. When the coil is de-energized, the pilot valve core returns via the spring, the pilot hole closes, and the upper chamber is pressurized through the piston throttle hole and the return spring thrust, closing the valve.

Normally Open: When the coil is energized, the pilot hole closes, and the upper chamber is pressurized through the piston throttle hole and the return spring thrust, closing the valve. When the coil is de-energized, the pilot valve core returns via the spring, the pilot hole opens, the upper chamber depressurizes, and the piston is pushed by the medium pressure in the lower chamber to open the valve.

Notes:

1. Before installation, impurities and welding slag in the pipeline must be cleaned to prevent internal leakage.

2. The solenoid valve is generally installed horizontally; vertical installation requires prior notice.

3. After installation, operate the valve several times normally before putting it into use.

4. If the medium contains impurities, install an 80-mesh filter before the valve.

5. If the outlet pressure is higher than the inlet, a check valve must be installed.

6. The solenoid valve coil produced by our factory can be removed and installed in reverse to function as a check valve with zero leakage.

When ordering, please specify the model, nominal diameter, actual working pressure, working medium, working pressure difference, medium temperature, power supply voltage and power, and medium viscosity.

OKE High Viscosity Solenoid Valve Features

Pilot-operated structure with stainless steel piston cores; the piston ring is not easily jammed by impurities in the medium, offering high dynamic sealing performance and long service life. The piston does not directly friction with the metal valve chamber, allowing unlimited installation direction. The coil is resistant to burning out. The valve remains highly responsive even after long periods of inactivity. Zero leakage; service life exceeds 1 million cycles.

OKE High Viscosity Solenoid Valve Detailed Parameters

Diameter: DN1～300mm

Pressure: 0.1-100 MPa

Operating Temperature: 220°C

Applicable Media: Resin, petroleum, crude oil, glue, paste, and other high viscosity media

Connection: Threaded, Flanged

Sealing Type: Soft seal; Hard seal

Protection: Waterproof, Dustproof, Explosion-proof, Corrosion-resistant

Actuation: Electromagnetic

Position: 2-position, 2-way

Valve Structure: Direct-acting, Pilot-operated

Valve Body Material: WCB, Stainless Steel 304, 316

Seal Material: PTFE, 304, 316

Power Supply: DC24V, DC220V, DC380V, AC24V, AC220V, AC380V; other requirements can be customized.